PROFILE S18

A profile with a depth of 18mm

This profile is designed mainly for wall frames, although in small sizes it can also be suspended on wires or a line.

In case of larger formats it is recommended to fix the frames directly to the wall. S18 allows the creation of decorative images and large format walls.

Dedicated to interior use. 

PROFILE S25

Reinforced profile with a 25mm depth

A profile designed mainly for constructing robust wall frames - hung or mounted directly to the wall.

Reinforced profile, in connection with proper stabilizers, allows to realize even large format pictures.

Dedicated to indoor and outdoor purposes. 

PROFILE S50D

Double-sided profile with a depth of 50 mm

A profile designed for constructing double-sided free-standing or suspended frames, which are perfect as walls or double-sided pictures. Stabilizers can be fixed in it, thanks to which it is possible to create larger frames.

The profile has a groove, which makes it easier to install accessories to the frame.

Dedicated to indoor use. 

PROFILE S50T

Profile with a depth of 50 mm dedicated to backlighting

It is designed to construct thin lightboxes which are usually fixed directly to the wall. S50T profile allows also for creation of double sided frames suspended on a line.

The fabric attached to the back of the frame allows the dibond composite panel to be aesthetically covered. S50T is ideal for illuminated images, including large format frames.

Dedicated to indoor applications. 

PROFILE F80

Double-sided profile with a depth of 80 mm for the construction of frames and spatial forms.

This robust profile is designed for the construction of four-sided, mainly suspended frames. F80 can also be used as a free-standing or suspended frame.

. The stretched graphic is joined at the edges to provide an aesthetically pleasing finish with no visible gaps.

A special F80 corner post is dedicated for corner connections. 

PROFILE S100

Double sided profile with 100mm depth and wide range of applications

A popular profile for lightboxes, illuminated pictures, free-standing walls and exhibition stands. Therefore, it is perfect as a standing, hanging or suspended frame.

Mounting the stabilisers allows you to make any format of the frame, while guaranteeing the stability of the entire structure. LED edge lighting is available in three types.

Dedicated to indoor and outdoor applications. 

*Notes: External use only possible for small frame sizes. 

PROFILE F120

Profile with a depth of 120 mm for construction of frames with backlight.

Profile is double sided, illumination is available only from one side.

Recommended especially for building large lightboxes with external use - with edge-lit Outdoor LED modules.

PROFILE F160

Profile with a depth of 160 mm for the construction of large frames with lighting

Dedicated to build suspensions with backlight and illuminated large frames. There is a possibility of double sided backlighting - with LED module mounting modules on stabilisers.

FC160C corner profile allows you to insert the fabric with graphics in an aesthetic way without any visible gap.

PROFILE FBOX

Profile for building spatial forms

Textile graphics can be mounted on six sides - the joints are in the corners, without visible gaps, which guarantees a high aesthetic finish.

Backlighting using spherical LED bulbs.*

*Notes: Uniform light dispersion can only be achieved in constructions not exceeding 2x2x2 m. In the case of larger structures, it is necessary to use stabilisers, which may slightly stand out when illuminated.